How To Shorten Levolor Cordless Blinds. Count the slats (excluding the last slat) from the end of the rail to the end of the window and mark the slat with a sticky note to know when to stop removing the slats. Push up the bottom rail until it reaches your new bottom slat.
Then, trim all ladder cords 4 in. The blinds can have the bottom rail housing the last slat and covered with caps on each end. On the bottom side of the rail, you'll see plastic buttons.
We Suggest Trying This Out Yourself And Go Diy Instead Of Seeking Professional Help,.
The blinds can have the bottom rail housing the last slat and covered with caps on each end. Make sure to secure the ladder cords in the plug notches finally, install the bottom rail end caps onto the bottom rail now enjoy your perfectly sized blinds from levolor! The next step is to fix the wand or cord system.
&Nbsp;Your Blinds Will Look Like This
Take off the end caps/bottom rail buttons. Push the excess cord length into the holes where the buttons go. Count the slats (excluding the last slat) from the end of the rail to the end of the window and mark the slat with a sticky note to know when to stop removing the slats.
Alternatively, They Can Have A Thinner Bottom Rail In Direct Contact With The Last Slat And Rail Buttons On The Bottom Side Of The Rail.
How to shorten levolor cordless blinds when a cord is involved in the blinds, people find it less challenging for this exercise. Carefully cut horizontal ladders below so you can remove the unwanted slats. Explore the levolor custom window coverings shopping guide, a road map for creating blinds, shades or shutters specifically for your needs.
Grab The Bottom Rail Of Your Blinds And Look Underneath It.
Page 11 of 11 trim&go! There are two designs for the bottom part of cordless blinds. At the bottom of the last slat, you will found three or.
Remove Plugs Located Under Bottom Rail.
Page 6 of 9 trim&go! Add 2 extra slats to length. Double check the desired length of the blind before any further cutting;